Array Management Commands


The array management CLI commands are described in alphabetical order in Table 1: Array Management Commands. These commands act on an individual PS Series array and are often used to perform maintenance.

Information about each command includes the following:

See Running Array Management Commands for information about running the commands.

Table 1: Array Management Commands

Command

Description

clearlostdata

Clears lost data on an array, as described in clearlostdata.

diag

Gathers diagnostic information from an array, as described in diag.

ping

Verifies connectivity between an array and other hosts on the network, as described in ping.

reset

Resets an array to the factory defaults (original condition), as described in reset.

restart

Shuts down and restarts an array, as described in restart.

shutdown

Performs a clean shutdown of an array, as described in shutdown.

update

Updates the firmware on an array, as described in update.